dedi sekarang dan ketika SMP

TAMPILAN MODEMKU TP LINK

STATUS
Device Information
		Firmware Version	:	5.0.0 Build 130527 Rel.04609
		MAC Address	:	e8:94:f6:7f:d2:cc
		CPU Usage	:	1%
		Memory Usage	:	21%
LAN
		IP Address	:	192.168.2.1
		Subnet Mask	:	255.255.255.0
		DHCP Server	:	Enabled
Wireless
		Current Connected Wireless Clients number is 0

ID MAC

WAN
		PVC VPI/VCI IP Address Subnet GateWay DNS Server Encapsulation Status PVC0 0/35 125.161.64.125 255.255.255.255 125.161.64.1 203.130.193.74 PPPoE Up PVC1 8/81 N/A N/A N/A N/A Bridge Up PVC2 8/88 N/A N/A N/A N/A Bridge Up PVC3 0/37 N/A N/A N/A N/A Bridge Up PVC4 55/555 N/A N/A N/A N/A Bridge Up PVC5 7/77 N/A N/A N/A N/A Bridge Up

ADSL
		ADSL Firmware Version	:	FwVer:3.20.39.20_TC3087 HwVer:T14.F7_11.2
		Line State	:	Showtime
		Modulation	:	ADSL2 PLUS
		Annex Mode	:	ANNEX_A
				Downstream	Upstream
		SNR Margin	:	35.5	12.3	db
		Line Attenuation	:	5.9	6.1	db
		Data Rate	:	5118	1019	kbps
		Max Rate	:	20804	1032	kbps
		CRC	:	0	0

INTERFACE SETUP

ATM VC
		Virtual Circuit	:

 

		Status	:	ActivatedDeactivated
		VPI	:	(range: 0~255)
		VCI	:	(range: 1~65535)
QoS
		ATM QoS	:

		PCR	:	cells/second
		SCR	:	cells/second
		MBS	:	cells

Encapsulation
		ISP	:	Dynamic IP Address
				Static IP Address
				PPPoA/PPPoE
				Bridge Mode

PPPoE/PPPoA
		Servicename	:
		Username	:
		Password	:
		Encapsulation	:

		Bridge Interface	:	ActivatedDeactivated
Connection Setting
		Connection	:	Always On (Recommended)
				Connect On-Demand (Close if idle forminutes)
				Connect Manually
		TCP MSS Option	:	TCP MSS(default:1400)bytes
IP Address
		Get IP Address	:	StaticDynamic
		Static IP Address	:
		IP Subnet Mask	:
		Gateway	:

NAT

:

		Default Route	:	YesNo
		TCP MTU Option	:	TCP MTU(default:1480)bytes

Dynamic Route

:

Direction

:

Multicast

:

ADVANCED SETUP Firewall Firewall : EnabledDisabled (WARNING: If you enabled Firewall, the modem can block such attack:Denial of Service, SYN Flooding, Ping of Death, TearDrop...etc) SPI : EnabledDisabled (WARNING: If you enabled SPI, all traffics initiated from WAN would be blocked, including DMZ, Virtual Server, and ACL WAN side.) ACCESS MANAGEMENT Access Control Setup ACL : ActivatedDeactivated Access Control Editing ACL Rule Index : Active : YesNo Secure IP Address :  ~  (0.0.0.0 ~ 0.0.0.0 means all IPs) Application : Interface : Access Control Listing Index Active Secure IP Address Application Interface 1 Yes 0.0.0.0-0.0.0.0 ALL LAN